Koristimo kolačiće kako bismo Vam pružili bolje korisničko iskustvo. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Detalji
ARISA S-4-630-420-200-FDE
Kategorija
Transfer Press
Objekta
42687
Proizvođač
ARISA
Model
S-4-630-420-200-FDE
God
1998
Kontrola
SIEMENS S7
Objekta
42687
Press Design | ||
---|---|---|
drive system: eccentric / crank | ||
frame design: H-frame, tie rod | ||
openings in uprights: yes | ||
number of suspensions: | 4 | |
opening in table: yes | ||
quick die change system: yes | ||
moving bolster design: front (T-track) | ||
feedstock transport direction: left to right |
Press forces | ||
---|---|---|
total force (nominal): | 630 | to |
Press Table | ||
---|---|---|
table surface (left-right): | 4200 | mm |
table surface (front-back): | 2000 | mm |
height above floor level: | 0 | mm |
Slide | ||
---|---|---|
table surface (left-right): | 4200 | mm |
table surface (front-back): | 2000 | mm |
stroke: | 400 | mm |
stroke rate (max.): | 40 | /min |
slide (mechan. Press) | ||
---|---|---|
slide adjustment: | 200 | mm |
Tool Assembly Dimensions | ||
---|---|---|
shut height (stroke down, adjustment up), BDC: | 1000 | mm |
distance between columns (H-frame): | 4470 | mm |
passline opening (free passage in side columns): | 2500 | mm |
free passage between side columns (height): | 2260 | mm |
Coil Chair | ||
---|---|---|
coil weight max.: | 10 | to |
Decoiler | ||
---|---|---|
design: single reel | ||
sheet width max.: | 200 | mm |
sheet width (min): | 1500 | mm |
coil weight max.: | 10 | to |
max. diameter of coil: | 1900 | mm |
mandrel expansion range from: | 470 | mm |
mandrel expansion range up to: | 520 | mm |
Crop Shear | ||
---|---|---|
sheet thickness max.: | 5 | mm |
working width max.: | 1000 | mm |
Leveller Unit | ||
---|---|---|
sheet width max.: | 1500 | mm |
sheet width (min): | 200 | mm |
sheet thickness max.: | 4 | mm |
sheet thickness min.: | 0.5 | mm |
material cross section max. (450 N/mm2): | 2400 | mm² |
number of leveller rolls: | 9 | |
distance between leveller rolls: | 50 | mm |
number of infeed-/outfeed rolls: | 2 | |
diameter of feed rolls: | 100 | mm |
feed velocity max.: | 32 | m/min |
drive power: | 11 | kW |
loop controls: yes |
Strip-Feeder | ||
---|---|---|
feeder type: roll feeder | ||
sheet width max.: | 1500 | mm |
sheet thickness max.: | 4 | mm |
feeding step min.: | 0 | mm |
feeding step max.: | 9999.99 | mm |
speed max.: | 100 | m/min |
Transfer System | ||
---|---|---|
distance between tools, stroke X max.: | 700 | mm |
distance between tools, stroke X min.: | 0 | mm |
stroke Y max.: | 300 | mm |
stroke Y min.: | 0 | mm |
stroke Z max.: | 80 | mm |
stroke Z min.: | 0 | mm |
Inner width clamping rails closed max.: | 600 | mm |
Inner width clamping rails closed min.: | 600 | mm |
Inner width clamping rails open max.: | 1900 | mm |
Electrical specifications | ||
---|---|---|
total power consumption: | 165.5 | kW |
mains voltage: | 400 | V |
mains frequency: | 50 | Hz |
Dimensions / weights | ||
---|---|---|
space requirements -left/right-: | 6100 | mm |
space requirements -front/back-: | 3900 | mm |
total height: | 7950 | mm |
height above floor level: | 5700 | mm |
height under floor level: | 2250 | mm |
total weight approx.: | 218000 | kg |
Attachments (presses) | ||
---|---|---|
moving bolster design: front (T-track) | ||
decoiler: yes | ||
leveller unit: yes | ||
strip feeder: yes | ||
feeder type: roll feeder | ||
waste cutter: yes | ||
press automation: yes | ||
gripper transfer system: yes | ||
safety guard / safety door: yes | ||
2-hand engagement: yes | ||
acc. to actual accident protection regulation: yes | ||
European CE standards: yes |
Demonstration video available, press already dismantled. Force point 12.5 mm in front of BDC Clutch-brake combination Clutches/min 20 Available working capacity 100kJ Max. Flywheel speed 525 rpm Hydraulic clutch Max. Weight of upper tool 20000 kg Straightening machine type RMBM 50.1500 UG.S Decoiler type V 10000 A-SH-1500-S Transfer type TCNT-3-700-V-180 Gripper rails - longitudinal feed 0 - 700 mm Gripper rails - closing stroke 2 x 0 - 150 mm Gripper rails - lifting stroke 0 - 80 mm Gripper rails - inner width closed 600 - 1900 mm Max. gripper bars - opening 2200 mm Gripper rail height above clamping plate 490 - 590 mm Gripper rails - cross section 100 x 100 mm Sliding table type 932.42 Length x depth 4200 x 2000 mm Table height above floor 500 mm Max. tool weight 20000 kg Sliding table movement to the front 4000 mm Crop shears TYPE K4CH-1000 Max. Width 1000 mm Max. Thickness 5 mm Max. Cross section 2400 mm Max. Working height 625 mm Working height adjustment 400 mm Roller prescub ACNS-1500 |