Utilizziamo i cookie per rendere migliore la tua esperienza di navigazione. Per rispettare la nuova direttiva sulla privacy, è necessario chiedere il tuo consenso per impostare i cookie. Dettagli
PLATARG 912
Categoria
Pressa transfer meccanica
Oggetto
43817
Fabbricante
PLATARG
Modello
912
Anno
1968
Oggetto
43817
| Costruzione | ||
|---|---|---|
| sistema di azionamento: eccentrica/crank | ||
| numero di bielle / cilindri: | 12 | |
| Forze | ||
|---|---|---|
| forza totale: | 45 | to |
| Slitta | ||
|---|---|---|
| corsa: | 165 | mm |
| Misure / pesi | ||
|---|---|---|
| Requisiti spazio -sinistra/destra-: | 3658 | mm |
| Requisiti spazio - davanti/dietro-: | 1829 | mm |
| Altezza totale: | 3200 | mm |
| Peso totale approssimativo: | 20000 | kg |
| Platarg 912 ICOP Transfer Press 6.5" Stroke - 3.15" Max Part Length * Strip and Release on the Stripper Forks * 11 Stripper forks included * Full Set of Bottom Cams with Kick up lever style * Oil Cup Lube on Top Shaft * Bijur Oiler Pump - Chain Drive, feeding all moving surfaces * Counter Balance pneumatic cylinders on top * Platarg 6" wide chopper - Bottom Shaft driven with cam * Platarg Air Clutch & Brake - Like Minster set up * Repaired transfer slide casting. Crack at mounting to press but Expertly repaired with steel plates, bolts and dowels. * Tie Rod frame construction - rods on each side of top shaft * Press is 9'3" tall without Counter Balances, 10'6" with Counter Balances. For Transport it can ship at 9'3" Tall. * Press is on shop floor under power and can be inspected. Good working older Platarg. * New 1968. Seller bought it new from Factory. |
| Platarg 912 ICOP Transfer Press 6.5" Stroke - 3.15" Max Part Length * Strip and Release on the Stripper Forks * 11 Stripper forks included * Full Set of Bottom Cams with Kick up lever style * Oil Cup Lube on Top Shaft * Bijur Oiler Pump - Chain Drive, feeding all moving surfaces * Counter Balance pneumatic cylinders on top * Platarg 6" wide chopper - Bottom Shaft driven with cam * Platarg Air Clutch & Brake - Like Minster set up * Repaired transfer slide casting. Crack at mounting to press but Expertly repaired with steel plates, bolts and dowels. * Tie Rod frame construction - rods on each side of top shaft * Press is 9'3" tall without Counter Balances, 10'6" with Counter Balances. For Transport it can ship at 9'3" Tall. * Press is on shop floor under power and can be inspected. Good working older Platarg. * New 1968. Seller bought it new from Factory. |
