Utilizziamo i cookie per rendere migliore la tua esperienza di navigazione. Per rispettare la nuova direttiva sulla privacy, è necessario chiedere il tuo consenso per impostare i cookie. Dettagli
HAUSER S40-400 S
Categoria
Jig Grinder
Oggetto
56380
Fabbricante
HAUSER
Modello
S40-400 S
Anno
1996
Controllo
FANUC 0 M
Oggetto
56380
| Zona di lavoro -cubica- | ||
|---|---|---|
| percorso di traslazione asse X: | 650 | mm |
| Percorso di traslazione asse Y: | 450 | mm |
| percorso di traslazione asse Z: | 130 | mm |
| Tavolo | ||
|---|---|---|
| Superficie di serraggio larghezza: | 770 | mm |
| Superficie di serraggio profondità: | 630 | mm |
| Peso max. del pezzo: | 500 | kg |
| Mandrino / testa | ||
|---|---|---|
| gamma di velocità (min): | 9000 | /min |
| gamma di velocità (max): | 60000 | /min |
| Dati elettrici di collegamento | ||
|---|---|---|
| Tensione di collegamento: | 400 | V |
| Frequenza della rete: | 50 | Hz |
| Misure / pesi | ||
|---|---|---|
| Requisiti spazio -sinistra/destra-: | 5400 | mm |
| Requisiti spazio - davanti/dietro-: | 4000 | mm |
| Peso totale approssimativo: | 4550 | kg |
| work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -HTG-RWS-60 automatic belt filter cooling unit x1 MSS (Multi-Sensoric System) tool detection device x1 CBN dressing unit with HF drive for automatic dressing of CBN grinding wheels (ceramic bond and synthetic resin) x1 T16 grinding turbine - speed: 160,000 rpm - reference: 164225 x1 turbine support with filter for use with T10 and T16 turbines - reference: 166497 x1 60S-TC grinding motor, speed 9000 - 60000 [rpm], for SK20 collets - part number: 208450 x1 intermediate plate for aligning motors and urbines - reference: 192940 x1 centring watch holder for grinding motor rotor - reference: 191790 x15 wheel holder cleats x1 cable for grinding motor Various tools Full documentation |
| work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -HTG-RWS-60 automatic belt filter cooling unit x1 MSS (Multi-Sensoric System) tool detection device x1 CBN dressing unit with HF drive for automatic dressing of CBN grinding wheels (ceramic bond and synthetic resin) x1 T16 grinding turbine - speed: 160,000 rpm - reference: 164225 x1 turbine support with filter for use with T10 and T16 turbines - reference: 166497 x1 60S-TC grinding motor, speed 9000 - 60000 [rpm], for SK20 collets - part number: 208450 x1 intermediate plate for aligning motors and urbines - reference: 192940 x1 centring watch holder for grinding motor rotor - reference: 191790 x15 wheel holder cleats x1 cable for grinding motor Various tools Full documentation |
