Koristimo kolačiće kako bismo Vam pružili bolje korisničko iskustvo. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Detalji
SHW UNISPEED 5T
Kategorija
Machining Center - Horiz. (APC)
Objekta
52106
Proizvođač
SHW
Model
UNISPEED 5T
God
2012
Kontrola
SIEMENS 840 D
Objekta
52106
| Working Range -cubic- | ||
|---|---|---|
| number of processing axes (excl parallel axes): | 5 | |
| X-axis travel: | 2000 | mm |
| Y-axis travel: | 1300 | mm |
| Z-axis travel: | 1300 | mm |
| Table | ||
|---|---|---|
| clamping surface diameter: | 1600 | mm |
| workpiece load (max): | 6000 | kg |
| spindle / head | ||
|---|---|---|
| spindle revolutions (min): | 22 | /min |
| spindle revolutions (max): | 6000 | /min |
| Axis drives | ||
|---|---|---|
| traverse velocity X (min): | 30000 | mm/min |
| traverse velocity Y (min): | 30000 | mm/min |
| traverse velocity Z (max): | 30000 | mm/min |
| Tool magazine | ||
|---|---|---|
| magazin type: chain magazine | ||
| number of positions: | 100 | |
| Electrical specifications | ||
|---|---|---|
| mains voltage: | 400 | V |
| mains frequency: | 50 | Hz |
| Dimensions / weights | ||
|---|---|---|
| space requirements -left/right-: | 6200 | mm |
| space requirements -front/back-: | 7400 | mm |
| total height: | 4200 | mm |
| Equipment: - 1x 6-jaw chuck - 1 Stark interchangeable clamping system permanently installed in the table (table Ø1600mm) - 3 round interchangeable tables with 1600mm diameter (including Stark clamping elements) - 1 square interchangeable table with 2000x1200mm diameter (including Stark clamping elements) - 1 angle milling head - 500 SK50 milling chucks (including pull studs) - 3D probe - Internal extraction system - 40 bar internal coolant supply - Tool changer with approximately 100 tool positions - Extensive clamping accessories |
| Equipment: - 1x 6-jaw chuck - 1 Stark interchangeable clamping system permanently installed in the table (table Ø1600mm) - 3 round interchangeable tables with 1600mm diameter (including Stark clamping elements) - 1 square interchangeable table with 2000x1200mm diameter (including Stark clamping elements) - 1 angle milling head - 500 SK50 milling chucks (including pull studs) - 3D probe - Internal extraction system - 40 bar internal coolant supply - Tool changer with approximately 100 tool positions - Extensive clamping accessories |
