Мы используем cookies, чтобы обеспечить наилучшее обслуживание. В соответствии с новой директивой электронной конфиденциальности, мы должны попросить вашего согласия, чтобы установить cookies. Подробности
FEINTOOL XFT 2500
Категория
Механический пресс для вырубки точных заготовок
Объект
43206
Производитель
FEINTOOL
Mодель
XFT 2500
Год
2010
Last Overhaul
2024
Управление
FEINTOOL FMC (BECKHOFF)
Объект
43206
Тип пресса | ||
---|---|---|
drive system: servomechanic | ||
feedstock transport direction: left to right |
Slide | ||
---|---|---|
Общее номинальное усилие: | 250 | to |
Ход: | 70 | mm |
Частота ходов, макс.: | 140 | /min |
Counter Ram | ||
---|---|---|
nominal force: | 625 | to |
Ход: | 25 | mm |
V-Ring | ||
---|---|---|
nominal force: | 1250 | to |
Ход: | 25 | mm |
Tool Dimensions | ||
---|---|---|
lower table (left-right): | 600 | mm |
lower table (front-back): | 600 | mm |
upper table (left-right): | 600 | mm |
upper table (front-back): | 600 | mm |
shut height max.: | 380 | mm |
ram adjustment: | 125 | mm |
Strip-Feeder | ||
---|---|---|
sheet width max.: | 250 | mm |
sheet thickness max.: | 10 | mm |
feeding step min.: | 0.1 | mm |
feeding step max.: | 300 | mm |
sheet length min: | 2500 | mm |
Crop Shear | ||
---|---|---|
Частота ходов, макс.: | 20 | /min |
cutting force: | 300 | kN |
Данные электр. Подключения | ||
---|---|---|
Общая потребляемая мощность: | 80 | kW |
Подводимая мощность: | 100 | kVA |
Напряжение питания: | 400 | V |
Частота тока в сети: | 50 | Hz |
Attachments -Fineblanking Press- | ||
---|---|---|
Размотчик рулона металла: no |
Overhauled machine by the manufacturer Feintool! Your advantages at a glance: + Modern press technology with direct servo drive for high accelerations and speeds + Synchronous operation of ram, counterholder and ring tine for the use of speed tools + High productivity thanks to higher output + Low energy costs + Cycle rate 1 to 140 strokes per minute + Maximum force from standstill + Freely programmable ram path + High degree of utilization + High tilting rigidity and press elongation for long die service life + Die change plate with hydraulic clamping + Pressure peak and speed-optimized hydraulics + User-friendly, large die installation space + Designed for straightening system with short long design Warranty in accordance with the conditions for overhaul machines: 6 months or 3,000 operating hours, whichever comes first Optional + Transport and packaging + Installation and commissioning of the press + Training |