Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
FEINTOOL XFT 2500
Kategorije
Finorezna stiskalnica - mehanska
Objekt
43206
Proizvajalec
FEINTOOL
Model
XFT 2500
Leto
2010
Last Overhaul
2024
Upravljanje
FEINTOOL FMC (BECKHOFF)
Objekt
43206
Press Design | ||
---|---|---|
drive system: servomechanic | ||
feedstock transport direction: left to right |
Slide | ||
---|---|---|
total force (nominal): | 250 | to |
stroke: | 70 | mm |
stroke rate (max.): | 140 | /min |
Counter Ram | ||
---|---|---|
nominal force: | 625 | to |
stroke: | 25 | mm |
V-Ring | ||
---|---|---|
nominal force: | 1250 | to |
stroke: | 25 | mm |
Tool Dimensions | ||
---|---|---|
lower table (left-right): | 600 | mm |
lower table (front-back): | 600 | mm |
upper table (left-right): | 600 | mm |
upper table (front-back): | 600 | mm |
shut height max.: | 380 | mm |
ram adjustment: | 125 | mm |
Strip-Feeder | ||
---|---|---|
Sirina traku maks.: | 250 | mm |
sheet thickness max.: | 10 | mm |
feeding step min.: | 0.1 | mm |
feeding step max.: | 300 | mm |
sheet length min: | 2500 | mm |
Crop Shear | ||
---|---|---|
stroke rate (max.): | 20 | /min |
cutting force: | 300 | kN |
Electrical specifications | ||
---|---|---|
total power consumption: | 80 | kW |
mains power supply: | 100 | kVA |
mains voltage: | 400 | V |
mains frequency: | 50 | Hz |
Attachments -Fineblanking Press- | ||
---|---|---|
decoiler: no |
Overhauled machine by the manufacturer Feintool! Your advantages at a glance: + Modern press technology with direct servo drive for high accelerations and speeds + Synchronous operation of ram, counterholder and ring tine for the use of speed tools + High productivity thanks to higher output + Low energy costs + Cycle rate 1 to 140 strokes per minute + Maximum force from standstill + Freely programmable ram path + High degree of utilization + High tilting rigidity and press elongation for long die service life + Die change plate with hydraulic clamping + Pressure peak and speed-optimized hydraulics + User-friendly, large die installation space + Designed for straightening system with short long design Warranty in accordance with the conditions for overhaul machines: 6 months or 3,000 operating hours, whichever comes first Optional + Transport and packaging + Installation and commissioning of the press + Training |