AMADA EUROPE 258

Kategori

Koordinat panç pres

Nesne

57707

Marka

AMADA

Model

EUROPE 258

İmalat

2001

Kontrol

FANUC GE SERIES 18I-P

Nesne
57707

İlgili kişi:

ProdEq Trading GmbH

Emanuel Unger

+41 71 948 7066
Konstruksyon  -Saç Kesim Makinası-
auto sheet repositioning:  evet
Çalışma Alanı   Pres
Toplam-nominal güç:   20 to
Saç Kalınlığı maks.  St 37:   6 mm
Revölver/Takım Değiştirici: Pozisyonların Adedi:   31
ELEKTRİK DEĞERLERİ
Bağlantı  Voltajı:   400 V
EBATLAR / AĞIRLIK
Kullanma Alanı Uzunluk:   4890 mm
Kullanma Alanı Genişlik:   3200 mm
Komple Yüksekliği:   2200 mm
Toplam ağırlık yaklaşık:   11500 kg
Technical Data:
Year of manufacture: 2001
Punching force: 20 t
Number of simultaneously controlled axes: 3 (X, Y, C)
Pneumatic clamps: 2
Turret speed: 25 rpm
Number of tools: 31
Amada stations: 2 x 1 1/4 inch and 1 x 2 inch
Max. tool diameter: 88.9 mm
Minimum programmable increment: 0.01 mm
Sheet metal processing:
Max. sheet thickness (using ball-transfer elements): 6 mm
Max. sheet thickness (using brush tables): 3 mm
Max. workpiece weight per table: 100 kg
Travel ranges:
Without repositioning: 1,250 x 2,000 mm
With one repositioning: 1,250 x 4,000 mm
Accuracy and performance:
Punching accuracy: 0.1 mm
Positioning accuracy (repeatability): 0.07 mm
Feed speed (X and Y): 82 m/min
Travel length (X): 2,000 mm, (Y): 1,270 mm
Strokes per minute at 25.4 mm feed: X 320 / Y 250
Nibbling rate at 1 mm feed: X 920 / Y 920
Dimensions and connections:
Length x width x height: 4,890 x 3,200 x 2,200 mm
Total weight: 11,500 kg
Oil capacity: 160 l
Power supply: 400 V three-phase, 48 A, 50 Hz
Compressed air: 6 bar
Equipment:
Safety light barrier, brush strips, and ball-bearing table elements. Both processing modes are ready for immediate use.

Note: Tools are not included in the scope of delivery.

The machine has only been in operation for 563 hours.
Technical Data:
Year of manufacture: 2001
Punching force: 20 t
Number of simultaneously controlled axes: 3 (X, Y, C)
Pneumatic clamps: 2
Turret speed: 25 rpm
Number of tools: 31
Amada stations: 2 x 1 1/4 inch and 1 x 2 inch
Max. tool diameter: 88.9 mm
Minimum programmable increment: 0.01 mm
Sheet metal processing:
Max. sheet thickness (using ball-transfer elements): 6 mm
Max. sheet thickness (using brush tables): 3 mm
Max. workpiece weight per table: 100 kg
Travel ranges:
Without repositioning: 1,250 x 2,000 mm
With one repositioning: 1,250 x 4,000 mm
Accuracy and performance:
Punching accuracy: 0.1 mm
Positioning accuracy (repeatability): 0.07 mm
Feed speed (X and Y): 82 m/min
Travel length (X): 2,000 mm, (Y): 1,270 mm
Strokes per minute at 25.4 mm feed: X 320 / Y 250
Nibbling rate at 1 mm feed: X 920 / Y 920
Dimensions and connections:
Length x width x height: 4,890 x 3,200 x 2,200 mm
Total weight: 11,500 kg
Oil capacity: 160 l
Power supply: 400 V three-phase, 48 A, 50 Hz
Compressed air: 6 bar
Equipment:
Safety light barrier, brush strips, and ball-bearing table elements. Both processing modes are ready for immediate use.

Note: Tools are not included in the scope of delivery.

The machine has only been in operation for 563 hours.

Emanuel Unger

Telif Hakkı © 2022 - ProdEq Group: Kullanılmış Makineler - Revizyonlar - Tasfiyeler - Tüm hakları saklıdır!