Size daha iyi hizmet verebilmek için çerezleri kullanıyoruz. Yeni e-Gizlilik kurallarına kapsamında, site fonksiyonlarının doğru çalışabilmesi için sizden çerez kullanma izni istiyoruz. Detaylar
FEINTOOL XFT 2500
Kategori
Hassas kesme presi -mekanik-
Nesne
43206
Marka
FEINTOOL
Model
XFT 2500
İmalat
2010
Last Overhaul
2024
Kontrol
FEINTOOL FMC (BECKHOFF)
Nesne
43206
PRES-KONSTRÜKSİYON | ||
---|---|---|
drive system: servomechanic | ||
feedstock transport direction: left to right |
Ana Piston | ||
---|---|---|
Toplam-nominal güç: | 250 | to |
Strok (kurs): | 70 | mm |
Vuruş sayısı maksimum: | 140 | /min |
Karşılık Tutucu | ||
---|---|---|
Güç: | 625 | to |
Strok (kurs): | 25 | mm |
V-Ring | ||
---|---|---|
Güç: | 1250 | to |
Strok (kurs): | 25 | mm |
Kalıp Bağlama Alanı | ||
---|---|---|
Alt Bağlama Alanı - Genişliği: | 600 | mm |
Alt Bağlama Alanı - Derinliği: | 600 | mm |
Yukarı Bağlama Alanı - Yüksekliği: | 600 | mm |
Yukarı Bağlama Alanı - Derinliği: | 600 | mm |
Bağlama yüksekliği maks.: | 380 | mm |
Koç Ayarı: | 125 | mm |
İlerleme Ünitesi | ||
---|---|---|
Saç Genişliği maks.: | 250 | mm |
Saç Kalınlığı maks.: | 10 | mm |
İlerleme (min.): | 0.1 | mm |
(İlerleme (maks.): | 300 | mm |
Şerit Boyu (min.): | 2500 | mm |
Crop Shear | ||
---|---|---|
Vuruş sayısı maksimum: | 20 | /min |
cutting force: | 300 | kN |
ELEKTRİK DEĞERLERİ | ||
---|---|---|
Enerji sarfiyatı (toplam): | 80 | kW |
Bağlantı Gücü: | 100 | kVA |
Bağlantı Voltajı: | 400 | V |
Frekans: | 50 | Hz |
Aksesuvar- Hassas Kesme Pres- | ||
---|---|---|
Rulo Açıcı: hayır |
Overhauled machine by the manufacturer Feintool! Your advantages at a glance: + Modern press technology with direct servo drive for high accelerations and speeds + Synchronous operation of ram, counterholder and ring tine for the use of speed tools + High productivity thanks to higher output + Low energy costs + Cycle rate 1 to 140 strokes per minute + Maximum force from standstill + Freely programmable ram path + High degree of utilization + High tilting rigidity and press elongation for long die service life + Die change plate with hydraulic clamping + Pressure peak and speed-optimized hydraulics + User-friendly, large die installation space + Designed for straightening system with short long design Warranty in accordance with the conditions for overhaul machines: 6 months or 3,000 operating hours, whichever comes first Optional + Transport and packaging + Installation and commissioning of the press + Training |