Size daha iyi hizmet verebilmek için çerezleri kullanıyoruz. Yeni e-Gizlilik kurallarına kapsamında, site fonksiyonlarının doğru çalışabilmesi için sizden çerez kullanma izni istiyoruz. Detaylar
PRESSTA EISELE PROFILMA 460
Kategori
Daire testere - otomatik
Nesne
45703
Marka
PRESSTA EISELE
Model
PROFILMA 460
İmalat
2023
Kontrol
SIEMENS S7
Nesne
45703
| Teknik Özellikler | ||
|---|---|---|
| Testere Biçak Çapı maks.: | 460 | mm |
| Kesim Alanı yuvarlak: | 146 | mm |
| Kesim Alanı dört köşe: | 138 | mm |
| mitre cutting: hayır | ||
| Kesim Alanı Dik Dörtgen: | 250 | mm |
| x : | 100 | mm |
| EBATLAR / AĞIRLIK | ||
|---|---|---|
| Kullanma Alanı Uzunluk: | 2200 | mm |
| Kullanma Alanı Genişlik: | 1950 | mm |
| Komple Yüksekliği: | 2000 | mm |
| Toplam ağırlık yaklaşık: | 2700 | kg |
| High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60% -Saw blade feed rate: 220 mm/s -3 × 2 m infeed roller conveyor, total length 6.2 m -Light barrier for material detection -Prepared for a loading magazine -Profile removal with separation of initial cut-off and remnant pieces -Vibrating table with discharge device -MG9 chip extraction system -Profile database, signal light, clamping sets -Line suitable for integration into an automated production line |
| High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60% -Saw blade feed rate: 220 mm/s -3 × 2 m infeed roller conveyor, total length 6.2 m -Light barrier for material detection -Prepared for a loading magazine -Profile removal with separation of initial cut-off and remnant pieces -Vibrating table with discharge device -MG9 chip extraction system -Profile database, signal light, clamping sets -Line suitable for integration into an automated production line |