Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
ARISA S-4-630-420-200-FDE
Kategorije
Transferna stiskalnica
Objekt
42687
Proizvajalec
ARISA
Model
S-4-630-420-200-FDE
Leto
1998
Upravljanje
SIEMENS S7
Objekt
42687
| Press Design | ||
|---|---|---|
| drive system: eccentric / crank | ||
| frame design: H-frame, tie rod | ||
| openings in uprights: yes | ||
| number of suspensions: | 4 | |
| opening in table: yes | ||
| quick die change system: yes | ||
| moving bolster design: front (T-track) | ||
| feedstock transport direction: left to right | ||
| Press forces | ||
|---|---|---|
| total force (nominal): | 630 | to |
| Press Table | ||
|---|---|---|
| table surface (left-right): | 4200 | mm |
| table surface (front-back): | 2000 | mm |
| height above floor level: | 0 | mm |
| Slide | ||
|---|---|---|
| table surface (left-right): | 4200 | mm |
| table surface (front-back): | 2000 | mm |
| stroke: | 400 | mm |
| stroke rate (max.): | 40 | /min |
| slide (mechan. Press) | ||
|---|---|---|
| slide adjustment: | 200 | mm |
| Tool Assembly Dimensions | ||
|---|---|---|
| shut height (stroke down, adjustment up), BDC: | 1000 | mm |
| distance between columns (H-frame): | 4470 | mm |
| passline opening (free passage in side columns): | 2500 | mm |
| free passage between side columns (height): | 2260 | mm |
| Coil Chair | ||
|---|---|---|
| coil weight max.: | 10 | to |
| Decoiler | ||
|---|---|---|
| design: single reel | ||
| Sirina traku maks.: | 200 | mm |
| sheet width (min): | 1500 | mm |
| coil weight max.: | 10 | to |
| max. diameter of coil: | 1900 | mm |
| mandrel expansion range from: | 470 | mm |
| mandrel expansion range up to: | 520 | mm |
| Crop Shear | ||
|---|---|---|
| sheet thickness max.: | 5 | mm |
| working width max.: | 1000 | mm |
| Leveller Unit | ||
|---|---|---|
| Sirina traku maks.: | 1500 | mm |
| sheet width (min): | 200 | mm |
| sheet thickness max.: | 4 | mm |
| sheet thickness min.: | 0.5 | mm |
| material cross section max. (450 N/mm2): | 2400 | mm² |
| number of leveller rolls: | 9 | |
| distance between leveller rolls: | 50 | mm |
| number of infeed-/outfeed rolls: | 2 | |
| diameter of feed rolls: | 100 | mm |
| feed velocity max.: | 32 | m/min |
| moĊ motorja: | 11 | kW |
| loop controls: yes | ||
| Strip-Feeder | ||
|---|---|---|
| feeder type: roll feeder | ||
| Sirina traku maks.: | 1500 | mm |
| sheet thickness max.: | 4 | mm |
| feeding step min.: | 0 | mm |
| feeding step max.: | 9999.99 | mm |
| speed max.: | 100 | m/min |
| Transfer System | ||
|---|---|---|
| distance between tools, stroke X max.: | 700 | mm |
| distance between tools, stroke X min.: | 0 | mm |
| stroke Y max.: | 300 | mm |
| stroke Y min.: | 0 | mm |
| stroke Z max.: | 80 | mm |
| stroke Z min.: | 0 | mm |
| Inner width clamping rails closed max.: | 600 | mm |
| Inner width clamping rails closed min.: | 600 | mm |
| Inner width clamping rails open max.: | 1900 | mm |
| Electrical specifications | ||
|---|---|---|
| total power consumption: | 165.5 | kW |
| mains voltage: | 400 | V |
| mains frequency: | 50 | Hz |
| Dimensions / weights | ||
|---|---|---|
| space requirements -left/right-: | 6100 | mm |
| space requirements -front/back-: | 3900 | mm |
| total height: | 7950 | mm |
| height above floor level: | 5700 | mm |
| height under floor level: | 2250 | mm |
| total weight approx.: | 218000 | kg |
| Attachments (presses) | ||
|---|---|---|
| moving bolster design: front (T-track) | ||
| decoiler: yes | ||
| leveller unit: yes | ||
| strip feeder: yes | ||
| feeder type: roll feeder | ||
| waste cutter: yes | ||
| press automation: yes | ||
| gripper transfer system: yes | ||
| safety guard / safety door: yes | ||
| 2-hand engagement: yes | ||
| acc. to actual accident protection regulation: yes | ||
| European CE standards: yes | ||
| Demonstration video available, press already dismantled. Force point 12.5 mm in front of BDC Clutch-brake combination Clutches/min 20 Available working capacity 100kJ Max. Flywheel speed 525 rpm Hydraulic clutch Max. Weight of upper tool 20000 kg Straightening machine type RMBM 50.1500 UG.S Decoiler type V 10000 A-SH-1500-S Transfer type TCNT-3-700-V-180 Gripper rails - longitudinal feed 0 - 700 mm Gripper rails - closing stroke 2 x 0 - 150 mm Gripper rails - lifting stroke 0 - 80 mm Gripper rails - inner width closed 600 - 1900 mm Max. gripper bars - opening 2200 mm Gripper rail height above clamping plate 490 - 590 mm Gripper rails - cross section 100 x 100 mm Sliding table type 932.42 Length x depth 4200 x 2000 mm Table height above floor 500 mm Max. tool weight 20000 kg Sliding table movement to the front 4000 mm Crop shears TYPE K4CH-1000 Max. Width 1000 mm Max. Thickness 5 mm Max. Cross section 2400 mm Max. Working height 625 mm Working height adjustment 400 mm Roller prescub ACNS-1500 |
