Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
KOHLER 50.400/9-BÜ-4000.1
Kategorije
Stroj za odvijanje in ravnanje traku
Objekt
45608
Proizvajalec
KOHLER
Model
50.400/9-BÜ-4000.1
Leto
1998
Objekt
45608
Overall Specifications (coil lines) | ||
---|---|---|
Sirina traku maks.: | 400 | mm |
sheet thickness max.: | 5 | mm |
coil weight max.: | 4 | to |
feedstock transport direction: left to right |
Coil Chair | ||
---|---|---|
coil weight max.: | 4 | to |
stroke: | 550 | mm |
Decoiler | ||
---|---|---|
Sirina traku maks.: | 400 | mm |
sheet width (min): | 30 | mm |
max. diameter of coil: | 1500 | mm |
mandrel expansion range from: | 460 | mm |
mandrel expansion range up to: | 530 | mm |
Leveller Unit | ||
---|---|---|
sheet thickness max.: | 5 | mm |
sheet thickness min.: | 0.5 | mm |
number of leveller rolls: | 9 | |
diameter of leveller rolls: | 50 | mm |
diameter of feed rolls: | 150 | mm |
feed velocity min.: | 0 | m/min |
feed velocity max.: | 50 | m/min |
Strip-Feeder | ||
---|---|---|
feeder type: roll feeder | ||
Sirina traku maks.: | 400 | mm |
sheet thickness max.: | 5 | mm |
pilot release system: yes |
Electrical specifications | ||
---|---|---|
total power consumption: | 85 | kW |
mains voltage: | 400 | V |
mains frequency: | 50 | Hz |
Coil line consisting of
+ 180° rotating coil loading chair
+ Single reel type 4000.1 with transverse travelling device
+ Insertion aids, pressure roller, hold-down roller, strip insertion wedge, strip side guide
+ 9-roller leveller type 50.400/9
+ belt transfer table
+ Loop control
+ 2-roll feed zig-zag WVE 160.400 Maximum strip cross-section 1000 mm2 at tensile strength 550 N/mm2 at max. yield strength 350 N/mm2 |