PLATARG 912

Kategorije

Transferna stiskalnica - mehanska

Objekt

43817

Proizvajalec

PLATARG

Model

912

Leto

1968

Objekt
43817

Kontaktna oseba:

Post-Venta Carreras S.A.

Antonio Vega

+34 937 649 680
Press Design
drive system:  eccentric / crank
number of suspensions:   12
Press forces
total force (nominal):   45 to
Slide
stroke:   165 mm
Dimensions / weights
space requirements -left/right-:   3658 mm
space requirements -front/back-:   1829 mm
total height:   3200 mm
total weight approx.:   20000 kg
Platarg 912 ICOP Transfer Press 6.5" Stroke - 3.15" Max Part Length
* Strip and Release on the Stripper Forks
* 11 Stripper forks included
* Full Set of Bottom Cams with Kick up lever style
* Oil Cup Lube on Top Shaft
* Bijur Oiler Pump - Chain Drive, feeding all moving surfaces
* Counter Balance pneumatic cylinders on top
* Platarg 6" wide chopper - Bottom Shaft driven with cam
* Platarg Air Clutch & Brake - Like Minster set up
* Repaired transfer slide casting. Crack at mounting to press but Expertly repaired with steel plates, bolts and dowels.
* Tie Rod frame construction - rods on each side of top shaft
* Press is 9'3" tall without Counter Balances, 10'6" with Counter Balances. For Transport it can ship at 9'3" Tall.
* Press is on shop floor under power and can be inspected. Good working older Platarg.
* New 1968. Seller bought it new from Factory.

Antonio Vega

Copyright © 2022 - ProdEq Group: Rabljeni Stroji - Remont - Likvidacija - Vse pravice pridržane!