Size daha iyi hizmet verebilmek için çerezleri kullanıyoruz. Yeni e-Gizlilik kurallarına kapsamında, site fonksiyonlarının doğru çalışabilmesi için sizden çerez kullanma izni istiyoruz. Detaylar
PLATARG 912
Kategori
Transfer presi -mekanik-
Nesne
43817
Marka
PLATARG
Model
912
İmalat
1968
Nesne
43817
| PRES-KONSTRÜKSİYON | ||
|---|---|---|
| drive system: eccentric / crank | ||
| number of suspensions: | 12 | |
| PRES GÜCÜ | ||
|---|---|---|
| Toplam-nominal güç: | 45 | to |
| KOÇ | ||
|---|---|---|
| Strok (kurs): | 165 | mm |
| EBATLAR / AĞIRLIK | ||
|---|---|---|
| Kullanma Alanı Uzunluk: | 3658 | mm |
| Kullanma Alanı Genişlik: | 1829 | mm |
| Komple Yüksekliği: | 3200 | mm |
| Toplam ağırlık yaklaşık: | 20000 | kg |
| Platarg 912 ICOP Transfer Press 6.5" Stroke - 3.15" Max Part Length * Strip and Release on the Stripper Forks * 11 Stripper forks included * Full Set of Bottom Cams with Kick up lever style * Oil Cup Lube on Top Shaft * Bijur Oiler Pump - Chain Drive, feeding all moving surfaces * Counter Balance pneumatic cylinders on top * Platarg 6" wide chopper - Bottom Shaft driven with cam * Platarg Air Clutch & Brake - Like Minster set up * Repaired transfer slide casting. Crack at mounting to press but Expertly repaired with steel plates, bolts and dowels. * Tie Rod frame construction - rods on each side of top shaft * Press is 9'3" tall without Counter Balances, 10'6" with Counter Balances. For Transport it can ship at 9'3" Tall. * Press is on shop floor under power and can be inspected. Good working older Platarg. * New 1968. Seller bought it new from Factory. |
| Platarg 912 ICOP Transfer Press 6.5" Stroke - 3.15" Max Part Length * Strip and Release on the Stripper Forks * 11 Stripper forks included * Full Set of Bottom Cams with Kick up lever style * Oil Cup Lube on Top Shaft * Bijur Oiler Pump - Chain Drive, feeding all moving surfaces * Counter Balance pneumatic cylinders on top * Platarg 6" wide chopper - Bottom Shaft driven with cam * Platarg Air Clutch & Brake - Like Minster set up * Repaired transfer slide casting. Crack at mounting to press but Expertly repaired with steel plates, bolts and dowels. * Tie Rod frame construction - rods on each side of top shaft * Press is 9'3" tall without Counter Balances, 10'6" with Counter Balances. For Transport it can ship at 9'3" Tall. * Press is on shop floor under power and can be inspected. Good working older Platarg. * New 1968. Seller bought it new from Factory. |
