Size daha iyi hizmet verebilmek için çerezleri kullanıyoruz. Yeni e-Gizlilik kurallarına kapsamında, site fonksiyonlarının doğru çalışabilmesi için sizden çerez kullanma izni istiyoruz. Detaylar
PLATARG 2513
Kategori
Transfer presi
Nesne
46301
Marka
PLATARG
Model
2513
İmalat
1996
Last Overhaul
2017
Nesne
46301
| PRES-KONSTRÜKSİYON | ||
|---|---|---|
| drive system: eccentric / crank | ||
| Konstrüksiyon: H-kare, yekpare gövdeli | ||
| number of suspensions: | 7 | |
| Koç sayısı: | 13 | |
| feedstock transport direction: left to right | ||
| PRES GÜCÜ | ||
|---|---|---|
| Toplam-nominal güç: | 130 | to |
| KOÇ | ||
|---|---|---|
| Strok (kurs): | 197 | mm |
| slide (mechan. Press) | ||
|---|---|---|
| Koç Reglajı: | 19 | mm |
| Vuruş Sayısı (min.): | 30 | /min |
| Vuruş sayısı maksimum: | 70 | /min |
| BAĞLAMA EBATLARI | ||
|---|---|---|
| Bağlama yüksekliği maksimum: | 203 | mm |
| ELEKTRİK DEĞERLERİ | ||
|---|---|---|
| Enerji sarfiyatı (toplam): | 30 | kW |
| EBATLAR / AĞIRLIK | ||
|---|---|---|
| Kullanma Alanı Uzunluk: | 4090 | mm |
| Kullanma Alanı Genişlik: | 1727 | mm |
| Yerden Yüksekliği: | 3900 | mm |
| Toplam ağırlık yaklaşık: | 32000 | kg |
| Attachments (presses) | ||
|---|---|---|
| strip feeder: evet | ||
| feeder type: roll feeder | ||
| Hurda Kesme: evet | ||
| press automation: evet | ||
| gripper transfer system: evet | ||
| safety guard / safety door: evet | ||
| noise protection cabin: evet | ||
| güncel Kaza Koruma Kanunlara uygun: evet | ||
| Can be tested in operation
Max. Flywheel speed: 760 1/min.
Capacity on one stage approx. 25T
Clutch engagement max. 10/min
Air pressure 5.5 bar (min) - 5.8 bar (max)
Total deceleration time
Braking <250 ms
Zig-Zag
Stroke length
2 stages 152.4 mm (6")
2 stages 177.8 mm (7")
8 steps 196.85 mm (7 3/4")
Closing height (to die holder) 203 mm (8")
Plunger distance 127 mm
Max. Shell height approx. 78 mm
Max. Plate diameter (single-row punching) 114 mm
Max. Panel diameter (double-row punching) 108 mm
Brankamp press force monitoring (carried out by a Brankamp PK5000 device with 8 channels), isntall 2013
SIEMENS temperature monitoring (temperature monitoring of the bearing points is ensured with Siemens elements - (own construction), install 2021
Frequency converter 21F5H1R-950A www.keb.de of the main motor (was completely overhauled in 2017) Additional pneumatic valve terminal (valve terminal available with Rexroth components for 14 pneumatic connections), install 2013 |
| Can be tested in operation
Max. Flywheel speed: 760 1/min.
Capacity on one stage approx. 25T
Clutch engagement max. 10/min
Air pressure 5.5 bar (min) - 5.8 bar (max)
Total deceleration time
Braking <250 ms
Zig-Zag
Stroke length
2 stages 152.4 mm (6")
2 stages 177.8 mm (7")
8 steps 196.85 mm (7 3/4")
Closing height (to die holder) 203 mm (8")
Plunger distance 127 mm
Max. Shell height approx. 78 mm
Max. Plate diameter (single-row punching) 114 mm
Max. Panel diameter (double-row punching) 108 mm
Brankamp press force monitoring (carried out by a Brankamp PK5000 device with 8 channels), isntall 2013
SIEMENS temperature monitoring (temperature monitoring of the bearing points is ensured with Siemens elements - (own construction), install 2021
Frequency converter 21F5H1R-950A www.keb.de of the main motor (was completely overhauled in 2017) Additional pneumatic valve terminal (valve terminal available with Rexroth components for 14 pneumatic connections), install 2013 |
