Size daha iyi hizmet verebilmek için çerezleri kullanıyoruz. Yeni e-Gizlilik kurallarına kapsamında, site fonksiyonlarının doğru çalışabilmesi için sizden çerez kullanma izni istiyoruz. Detaylar
HAUSER S40-400 S
Kategori
Koordinat delik taşlama makinesi
Nesne
56380
Marka
HAUSER
Model
S40-400 S
İmalat
1996
Kontrol
FANUC 0 M
Nesne
56380
| Çalışma Alanı -kübik- | ||
|---|---|---|
| Hareket x-eksen: | 650 | mm |
| Hareket y-eksen: | 450 | mm |
| Z-axis travel: | 130 | mm |
| Tabla | ||
|---|---|---|
| Bağlama alanının genişliği (sol – sağ): | 770 | mm |
| Bağlama alanının genişliği (ön – arka): | 630 | mm |
| Parça Ağırlığı maks.: | 500 | kg |
| Mili / Başlık | ||
|---|---|---|
| Devir max.: | 9000 | /min |
| Devir min.: | 60000 | /min |
| ELEKTRİK DEĞERLERİ | ||
|---|---|---|
| Bağlantı Voltajı: | 400 | V |
| Frekans: | 50 | Hz |
| EBATLAR / AĞIRLIK | ||
|---|---|---|
| Kullanma Alanı Uzunluk: | 5400 | mm |
| Kullanma Alanı Genişlik: | 4000 | mm |
| Toplam ağırlık yaklaşık: | 4550 | kg |
| work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -HTG-RWS-60 automatic belt filter cooling unit x1 MSS (Multi-Sensoric System) tool detection device x1 CBN dressing unit with HF drive for automatic dressing of CBN grinding wheels (ceramic bond and synthetic resin) x1 T16 grinding turbine - speed: 160,000 rpm - reference: 164225 x1 turbine support with filter for use with T10 and T16 turbines - reference: 166497 x1 60S-TC grinding motor, speed 9000 - 60000 [rpm], for SK20 collets - part number: 208450 x1 intermediate plate for aligning motors and urbines - reference: 192940 x1 centring watch holder for grinding motor rotor - reference: 191790 x15 wheel holder cleats x1 cable for grinding motor Various tools Full documentation |
| work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -HTG-RWS-60 automatic belt filter cooling unit x1 MSS (Multi-Sensoric System) tool detection device x1 CBN dressing unit with HF drive for automatic dressing of CBN grinding wheels (ceramic bond and synthetic resin) x1 T16 grinding turbine - speed: 160,000 rpm - reference: 164225 x1 turbine support with filter for use with T10 and T16 turbines - reference: 166497 x1 60S-TC grinding motor, speed 9000 - 60000 [rpm], for SK20 collets - part number: 208450 x1 intermediate plate for aligning motors and urbines - reference: 192940 x1 centring watch holder for grinding motor rotor - reference: 191790 x15 wheel holder cleats x1 cable for grinding motor Various tools Full documentation |
