FEINTOOL FB ONE 11000

Teknik Özellikler

PRES-KONSTRÜKSİYON
drive system: servohydraulic
Konstrüksiyon: H-kare, bağlantı çubukları
Hızlı kalıp değiştirme sistemi: evet
feedstock transport direction: left to right

Ana Piston
Toplam-nominal güç:	1100	to
Strok (kurs):	130	mm
Vuruş sayısı maksimum:	60	/min

Karşılık Tutucu
Güç:	330	to
Strok (kurs):	40	mm

V-Ring
Güç:	500	to
Strok (kurs):	40	mm

Kalıp Bağlama Alanı
Alt Bağlama Alanı - Genişliği:	960	mm
Alt Bağlama Alanı - Derinliği:	960	mm
Yukarı Bağlama Alanı - Yüksekliği:	960	mm
Yukarı Bağlama Alanı - Derinliği:	960	mm
Bağlama yüksekliği maks.:	470	mm

Overall Specifications (coil lines)
Saç Genişliği maks.:	500	mm
Saç Kalınlığı maks.:	16	mm
Maks. Makara Ağırlığı:	8	to
feedstock transport direction: left to right

Coil Chair
Maks. Makara Ağırlığı:	8	to
Strok (kurs):	700	mm

Rulo Açıcı
Maks. Makara Ağırlığı:	8	to
Makaranın maks. Dış Çapı:	1800	mm
Makaranın min. İç Çapı:	470	mm
mandrel expansion range up to:	530	mm

Saç Doğrultma Ünitesi
Saç Genişliği maks.:	500	mm
Saç Genişliği (min.):	80	mm
Saç Kalınlığı maks.:	16	mm
Saç Kalınlığı min.:	1.5	mm
material cross section max. (450 N/mm2):	3510	mm²
Adet Doğrultma Silindirlerin:	17
integrated feed function: evet
intermediate clamp release: evet
cleaning device for leveller rollers: evet

Crop Shear
cutting force:	800	kN

ELEKTRİK DEĞERLERİ
Bağlantı Gücü:	350	kVA
Bağlantı Voltajı:	400	V
Frekans:	50	Hz

EBATLAR / AĞIRLIK
Toplam ağırlık yaklaşık:	75350	kg

Absolutely mint condition: just 3'300 running hours, 700'000 strokes

Special equipment fineblanking press:
+ block hydraulics for 4th and 5th force. High pressure 30-270 bar.
+ mechanical reamers (without tool-bound sliders)
+ additional operating mode "cutting without counter-holder and V-ring"
+ additional operating mode "manual insert mode"
+ 2 blast air circuits with 6 connections each
+ Additional tool monitoring
+ RAZIOL roller belt lubrication system with 2 reservoirs
+ Interface for monitoring the cooling system
- the scrap conveyor (visible on photos) is not part of the scope

ARKU single reel with loading chair:
+ 2 pressure arms for high-strength coil material
+ Coil guidance via conical rollers
+ Automatic coil centre positioning

ARKU feed straightening machine:
max. straightening cross-section at 600 N/mm2: 3510 mm2
+ Synchronised drive of the straightening rollers
+ Hardened and ground straightening rollers
+ Servo-hydraulic leveller gap control
+ Straightening roller quick-change system
+ intermediate roller release
+ Measuring wheel for feed control

Açıklama

Absolutely mint condition: just 3'300 running hours, 700'000 strokes

Special equipment fineblanking press:
+ block hydraulics for 4th and 5th force. High pressure 30-270 bar.
+ mechanical reamers (without tool-bound sliders)
+ additional operating mode "cutting without counter-holder and V-ring"
+ additional operating mode "manual insert mode"
+ 2 blast air circuits with 6 connections each
+ Additional tool monitoring
+ RAZIOL roller belt lubrication system with 2 reservoirs
+ Interface for monitoring the cooling system
- the scrap conveyor (visible on photos) is not part of the scope

ARKU single reel with loading chair:
+ 2 pressure arms for high-strength coil material
+ Coil guidance via conical rollers
+ Automatic coil centre positioning

ARKU feed straightening machine:
max. straightening cross-section at 600 N/mm2: 3510 mm2
+ Synchronised drive of the straightening rollers
+ Hardened and ground straightening rollers
+ Servo-hydraulic leveller gap control
+ Straightening roller quick-change system
+ intermediate roller release
+ Measuring wheel for feed control

FEINTOOL FB ONE 11000

İlgili kişi:

Frank Goedicke

FEINTOOL FB ONE 11000

İlgili kişi:

Bir teklif isteği

Frank Goedicke