Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
LAUFFER EPT 100
Kategorije
Stiskalnica - hidravliĊna
Objekt
49540
Proizvajalec
LAUFFER
Model
EPT 100
Leto
1990
Upravljanje
SIEMENS S5
Objekt
49540
| Press Design | ||
|---|---|---|
| drive system: hydraulic | ||
| frame design: C-frame, single sided | ||
| openings in uprights: yes | ||
| table cushion: yes | ||
| opening in table: yes | ||
| Press forces | ||
|---|---|---|
| total force (nominal): | 100 | to |
| Press Table | ||
|---|---|---|
| table surface (left-right): | 710 | mm |
| table surface (front-back): | 560 | mm |
| Slide | ||
|---|---|---|
| slide force: | 100 | to |
| table surface (left-right): | 560 | mm |
| table surface (front-back): | 450 | mm |
| spigot hole diameter: | 50 | mm |
| stroke: | 320 | mm |
| thickness of bolster plate: | 150 | mm |
| slide (hydr. Press) | ||
|---|---|---|
| approximation velocity max.: | 340 | mm/s |
| working velocity max.: | 32 | mm/s |
| return velocity max.: | 330 | mm/s |
| slide ejector / cushion | ||
|---|---|---|
| stroke: | 40 | mm |
| Die Cushion (table cushion) | ||
|---|---|---|
| stroke: | 80 | mm |
| Tool Assembly Dimensions | ||
|---|---|---|
| shut height (stroke down, adjustment up), BDC: | 455 | mm |
| Strip-Feeder | ||
|---|---|---|
| feeder type: roll feeder | ||
| Sirina traku maks.: | 300 | mm |
| sheet thickness max.: | 20 | mm |
| speed max.: | 120 | m/min |
| Electrical specifications | ||
|---|---|---|
| mains voltage: | 400 | V |
| mains frequency: | 50 | Hz |
| Dimensions / weights | ||
|---|---|---|
| space requirements -front/back-: | 2100 | mm |
| total height: | 3200 | mm |
| total weight approx.: | 8500 | kg |
| Attachments (presses) | ||
|---|---|---|
| decoiler: optional | ||
| leveller unit: optional | ||
| strip feeder: yes | ||
| 2-hand engagement: yes | ||
| Equipment: - Cutting impact dampening - Hydraulic die cushion and ejector - CNC - gripper feed (200x900x1700) - Soprem belt system (optional) see article no. 3-49541 |
| Equipment: - Cutting impact dampening - Hydraulic die cushion and ejector - CNC - gripper feed (200x900x1700) - Soprem belt system (optional) see article no. 3-49541 |
