Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
FEINTOOL GKP 160
Kategorije
Finorezna stiskalnica - mehanska
Objekt
46191
Proizvajalec
FEINTOOL
Model
GKP 160
Leto
1983
Last Overhaul
2019
Upravljanje
BIVIATOR BIVIATOR YOM 2012
Objekt
46191
| Press Design | ||
|---|---|---|
| drive system: knuckle-joint | ||
| feedstock transport direction: right to left | ||
| Slide | ||
|---|---|---|
| total force (nominal): | 160 | to |
| stroke: | 60 | mm |
| stroke rate (max.): | 72 | /min |
| Tool Dimensions | ||
|---|---|---|
| lower table (left-right): | 500 | mm |
| shut height max.: | 277 | mm |
| Decoiler | ||
|---|---|---|
| design: single reel | ||
| Strip-Feeder | ||
|---|---|---|
| feeder type: roll feeder | ||
| Attachments -Fineblanking Press- | ||
|---|---|---|
| closed cabin: yes | ||
| decoiler: yes | ||
| leveller unit: yes | ||
| waste cutter: yes | ||
| The press, including the straightening line, is still in operation and can be inspected under power The machine was mechanically overhauled in 2016 ( articulation). Since then, the machine has made 27,538,408 strokes and is still running perfectly today. In 2019, we replaced the ram guide and since then the machine has made 13,427,325 strokes. |
| The press, including the straightening line, is still in operation and can be inspected under power The machine was mechanically overhauled in 2016 ( articulation). Since then, the machine has made 27,538,408 strokes and is still running perfectly today. In 2019, we replaced the ram guide and since then the machine has made 13,427,325 strokes. |
