Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
DMG CMX 600 V
Kategorije
Obdelovalni center - vertikalni
Objekt
55699
Proizvajalec
DMG
Model
CMX 600 V
Leto
2018
Upravljanje
SIEMENS SOLUTION LINE
Objekt
55699
| Working Range -cubic- | ||
|---|---|---|
| number of processing axes (excl parallel axes): | 3 | |
| X-axis travel: | 600 | mm |
| Y-axis travel: | 560 | mm |
| Z-axis travel: | 510 | mm |
| Table | ||
|---|---|---|
| table surface (left-right): | 900 | mm |
| table surface (front-back): | 560 | mm |
| workpiece load (max): | 600 | kg |
| spindle / head | ||
|---|---|---|
| spindle revolutions (min): | 20 | /min |
| spindle revolutions (max): | 12000 | /min |
| tool fixture: ISO SK 40 | ||
| moĊ motorja S6 40%: | 13 | kW |
| moĊ motorja S1 100%: | 9 | kW |
| vretena navor S6 40%: | 82 | Nm |
| vretena navor S1 100%: | 54 | Nm |
| Axis drives | ||
|---|---|---|
| traverse velocity X (max): | 20000 | mm/min |
| traverse velocity Y (max): | 20000 | mm/min |
| traverse velocity Z (max): | 20000 | mm/min |
| rapid traverse X: | 30000 | mm/min |
| rapid traverse Y: | 30000 | mm/min |
| rapid traverse Z: | 30000 | mm/min |
| Tool magazine | ||
|---|---|---|
| number of positions: | 30 | |
| tool diameter max.: | 80 | mm |
| - with free neighbour positions: | 125 | mm |
| tool length max.: | 300 | mm |
| tool weight max.: | 8 | kg |
| Dimensions / weights | ||
|---|---|---|
| space requirements -left/right-: | 2757 | mm |
| space requirements -front/back-: | 1864 | mm |
| total height: | 2935 | mm |
| total weight approx.: | 5000 | kg |
| attachments | ||
|---|---|---|
| chip conveyor: yes | ||
| coolant unit: yes | ||
| through spindle coolant attachment: yes | ||
| closed cabin: yes | ||
| European CE standards: yes | ||
| The machine has 10,700 operating hours and 1,600 spindle hours, of which approximately 1,000 hours were warm-up time. The vise can be purchased separately for an additional charge. The machine is equipped with its own cooling system, but is currently connected to a central cooling unit. To use the built-in cooling system, a pump would need to be retrofitted. A parts list for the required components can be provided. Overall, the machine is in like-new condition. |
| The machine has 10,700 operating hours and 1,600 spindle hours, of which approximately 1,000 hours were warm-up time. The vise can be purchased separately for an additional charge. The machine is equipped with its own cooling system, but is currently connected to a central cooling unit. To use the built-in cooling system, a pump would need to be retrofitted. A parts list for the required components can be provided. Overall, the machine is in like-new condition. |