We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Details
PLATARG 2513
Categories
Transfer Press
Object
46301
Brand
PLATARG
Model
2513
YoM
1996
Last Overhaul
2017
Object
46301
| Press Design | ||
|---|---|---|
| drive system: eccentric / crank | ||
| frame design: H-frame, monoblock | ||
| number of suspensions: | 7 | |
| number of slide actions: | 13 | |
| feedstock transport direction: left to right | ||
| Press forces | ||
|---|---|---|
| total force (nominal): | 130 | to |
| Slide | ||
|---|---|---|
| stroke: | 197 | mm |
| slide (mechan. Press) | ||
|---|---|---|
| slide adjustment: | 19 | mm |
| stroke rate (min.): | 30 | /min |
| stroke rate (max.): | 70 | /min |
| Tool Assembly Dimensions | ||
|---|---|---|
| shut height (stroke down, adjustment up), BDC: | 203 | mm |
| Electrical specifications | ||
|---|---|---|
| total power consumption: | 30 | kW |
| Dimensions / weights | ||
|---|---|---|
| space requirements -left/right-: | 4090 | mm |
| space requirements -front/back-: | 1727 | mm |
| height above floor level: | 3900 | mm |
| total weight approx.: | 32000 | kg |
| Attachments (presses) | ||
|---|---|---|
| strip feeder: yes | ||
| feeder type: roll feeder | ||
| waste cutter: yes | ||
| press automation: yes | ||
| gripper transfer system: yes | ||
| safety guard / safety door: yes | ||
| noise protection cabin: yes | ||
| acc. to actual accident protection regulation: yes | ||
| Can be tested in operation
Max. Flywheel speed: 760 1/min.
Capacity on one stage approx. 25T
Clutch engagement max. 10/min
Air pressure 5.5 bar (min) - 5.8 bar (max)
Total deceleration time
Braking <250 ms
Zig-Zag
Stroke length
2 stages 152.4 mm (6")
2 stages 177.8 mm (7")
8 steps 196.85 mm (7 3/4")
Closing height (to die holder) 203 mm (8")
Plunger distance 127 mm
Max. Shell height approx. 78 mm
Max. Plate diameter (single-row punching) 114 mm
Max. Panel diameter (double-row punching) 108 mm
Brankamp press force monitoring (carried out by a Brankamp PK5000 device with 8 channels), isntall 2013
SIEMENS temperature monitoring (temperature monitoring of the bearing points is ensured with Siemens elements - (own construction), install 2021
Frequency converter 21F5H1R-950A www.keb.de of the main motor (was completely overhauled in 2017) Additional pneumatic valve terminal (valve terminal available with Rexroth components for 14 pneumatic connections), install 2013 |
| Can be tested in operation
Max. Flywheel speed: 760 1/min.
Capacity on one stage approx. 25T
Clutch engagement max. 10/min
Air pressure 5.5 bar (min) - 5.8 bar (max)
Total deceleration time
Braking <250 ms
Zig-Zag
Stroke length
2 stages 152.4 mm (6")
2 stages 177.8 mm (7")
8 steps 196.85 mm (7 3/4")
Closing height (to die holder) 203 mm (8")
Plunger distance 127 mm
Max. Shell height approx. 78 mm
Max. Plate diameter (single-row punching) 114 mm
Max. Panel diameter (double-row punching) 108 mm
Brankamp press force monitoring (carried out by a Brankamp PK5000 device with 8 channels), isntall 2013
SIEMENS temperature monitoring (temperature monitoring of the bearing points is ensured with Siemens elements - (own construction), install 2021
Frequency converter 21F5H1R-950A www.keb.de of the main motor (was completely overhauled in 2017) Additional pneumatic valve terminal (valve terminal available with Rexroth components for 14 pneumatic connections), install 2013 |
