Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
FEINTOOL GKP F 250
Kategorije
Finorezna stiskalnica - mehanska
Objekt
48186
Proizvajalec
FEINTOOL
Model
GKP F 250
Leto
1978
Objekt
48186
| Slide | ||
|---|---|---|
| total force (nominal): | 250 | to |
| stroke: | 61 | mm |
| stroke rate (max.): | 60 | /min |
| stroke rate (min.): | 15 | /min |
| Counter Ram | ||
|---|---|---|
| nominal force: | 75 | to |
| V-Ring | ||
|---|---|---|
| nominal force: | 75 | to |
| Tool Dimensions | ||
|---|---|---|
| lower table (left-right): | 540 | mm |
| lower table (front-back): | 540 | mm |
| upper table (left-right): | 540 | mm |
| upper table (front-back): | 540 | mm |
| Strip-Feeder | ||
|---|---|---|
| Sirina traku maks.: | 250 | mm |
| sheet thickness max.: | 10 | mm |
| sheet length min: | 1500 | mm |
| Dimensions / weights | ||
|---|---|---|
| space requirements -left/right-: | 3150 | mm |
| space requirements -front/back-: | 2120 | mm |
| total height: | 3000 | mm |
| total weight approx.: | 14000 | kg |
| Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: 160 - 305 mm Fixed: 175 - 320 mm Vertical adjustability of the upper clamping plate: Movable: 145 mm Fixed: 145 mm Fine blanking table: Max. hydraulic stroke both movable and fixed: 15 mm Max. counterholder stroke in head, movable and fixed: 13 mm T-slots in the clamping plates for movable M16, fixed M16 Movable and fixed table travel: 6 mm |
| Located in Barcelona - Spain Installation space of the tools Front passage between the columns: Movable: 560 mm Fixed: 560 mm Side passage between the columns: Movable: 270 mm Fixed: 270 mm Tool height: Movable: 160 - 305 mm Fixed: 175 - 320 mm Vertical adjustability of the upper clamping plate: Movable: 145 mm Fixed: 145 mm Fine blanking table: Max. hydraulic stroke both movable and fixed: 15 mm Max. counterholder stroke in head, movable and fixed: 13 mm T-slots in the clamping plates for movable M16, fixed M16 Movable and fixed table travel: 6 mm |
