Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
PLATARG 2513
Kategorije
Transferna stiskalnica
Objekt
46301
Proizvajalec
PLATARG
Model
2513
Leto
1996
Last Overhaul
2017
Objekt
46301
| Press Design | ||
|---|---|---|
| drive system: eccentric / crank | ||
| frame design: H-frame, monoblock | ||
| number of suspensions: | 7 | |
| number of slide actions: | 13 | |
| feedstock transport direction: left to right | ||
| Press forces | ||
|---|---|---|
| total force (nominal): | 130 | to |
| Slide | ||
|---|---|---|
| stroke: | 197 | mm |
| slide (mechan. Press) | ||
|---|---|---|
| slide adjustment: | 19 | mm |
| stroke rate (min.): | 30 | /min |
| stroke rate (max.): | 70 | /min |
| Tool Assembly Dimensions | ||
|---|---|---|
| shut height (stroke down, adjustment up), BDC: | 203 | mm |
| Electrical specifications | ||
|---|---|---|
| total power consumption: | 30 | kW |
| Dimensions / weights | ||
|---|---|---|
| space requirements -left/right-: | 4090 | mm |
| space requirements -front/back-: | 1727 | mm |
| height above floor level: | 3900 | mm |
| total weight approx.: | 32000 | kg |
| Attachments (presses) | ||
|---|---|---|
| strip feeder: yes | ||
| feeder type: roll feeder | ||
| waste cutter: yes | ||
| press automation: yes | ||
| gripper transfer system: yes | ||
| safety guard / safety door: yes | ||
| noise protection cabin: yes | ||
| acc. to actual accident protection regulation: yes | ||
| Can be tested in operation
Max. Flywheel speed: 760 1/min.
Capacity on one stage approx. 25T
Clutch engagement max. 10/min
Air pressure 5.5 bar (min) - 5.8 bar (max)
Total deceleration time
Braking <250 ms
Zig-Zag
Stroke length
2 stages 152.4 mm (6")
2 stages 177.8 mm (7")
8 steps 196.85 mm (7 3/4")
Closing height (to die holder) 203 mm (8")
Plunger distance 127 mm
Max. Shell height approx. 78 mm
Max. Plate diameter (single-row punching) 114 mm
Max. Panel diameter (double-row punching) 108 mm
Brankamp press force monitoring (carried out by a Brankamp PK5000 device with 8 channels), isntall 2013
SIEMENS temperature monitoring (temperature monitoring of the bearing points is ensured with Siemens elements - (own construction), install 2021
Frequency converter 21F5H1R-950A www.keb.de of the main motor (was completely overhauled in 2017) Additional pneumatic valve terminal (valve terminal available with Rexroth components for 14 pneumatic connections), install 2013 |
| Can be tested in operation
Max. Flywheel speed: 760 1/min.
Capacity on one stage approx. 25T
Clutch engagement max. 10/min
Air pressure 5.5 bar (min) - 5.8 bar (max)
Total deceleration time
Braking <250 ms
Zig-Zag
Stroke length
2 stages 152.4 mm (6")
2 stages 177.8 mm (7")
8 steps 196.85 mm (7 3/4")
Closing height (to die holder) 203 mm (8")
Plunger distance 127 mm
Max. Shell height approx. 78 mm
Max. Plate diameter (single-row punching) 114 mm
Max. Panel diameter (double-row punching) 108 mm
Brankamp press force monitoring (carried out by a Brankamp PK5000 device with 8 channels), isntall 2013
SIEMENS temperature monitoring (temperature monitoring of the bearing points is ensured with Siemens elements - (own construction), install 2021
Frequency converter 21F5H1R-950A www.keb.de of the main motor (was completely overhauled in 2017) Additional pneumatic valve terminal (valve terminal available with Rexroth components for 14 pneumatic connections), install 2013 |
