Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
INVERNIZZI T630
Kategorije
Transferna stiskalnica
Objekt
57400
Proizvajalec
INVERNIZZI
Model
T630
Leto
2009
Upravljanje
SIEMENS S7
Objekt
57400
| Press Design | ||
|---|---|---|
| drive system: servomechanic | ||
| Press forces | ||
|---|---|---|
| total force (nominal): | 630 | to |
| Press Table | ||
|---|---|---|
| table surface (left-right): | 5450 | mm |
| table surface (front-back): | 910 | mm |
| Slide | ||
|---|---|---|
| table surface (left-right): | 5500 | mm |
| table surface (front-back): | 800 | mm |
| slide (mechan. Press) | ||
|---|---|---|
| stroke adjustment: yes | ||
| stroke min.: | 220 | mm |
| stroke max.: | 350 | mm |
| Tool Assembly Dimensions | ||
|---|---|---|
| shut height (stroke down, adjustment up), BDC: | 680 | mm |
| Coil Chair | ||
|---|---|---|
| coil weight max.: | 8 | to |
| Decoiler | ||
|---|---|---|
| Sirina traku maks.: | 410 | mm |
| coil weight max.: | 8 | to |
| max. diameter of coil: | 2000 | mm |
| Transfer System | ||
|---|---|---|
| number of tool stations: | 20 | |
| distance between tools, stroke X fixed: | 225 | mm |
| Electrical specifications | ||
|---|---|---|
| mains voltage: | 400 | V |
| mains frequency: | 50 | Hz |
| Dimensions / weights | ||
|---|---|---|
| space requirements -left/right-: | 28000 | mm |
| space requirements -front/back-: | 15000 | mm |
| total height: | 10000 | mm |
| height above floor level: | 7000 | mm |
| height under floor level: | 3000 | mm |
| total weight approx.: | 200000 | kg |
| Attachments (presses) | ||
|---|---|---|
| decoiler: yes | ||
| leveller unit: yes | ||
| strip feeder: yes | ||
| European CE standards: yes | ||
| Complete press line (Siemens S7) - Press (20 stations) - Coiler: FOD 80/750 MA - Straightening machine: RMP 40/9/80 - Feeder: AE/Z40 Technical Data: - Step spacing 225 mm - Max. pressing force per station 60 tons - Stroke rate 20-60/min - Pulling height 105 mm - Ram stroke 220-350 mm (adjustment in 1 mm increments) - XYZ axes of the transfer are adjustable |
| Complete press line (Siemens S7) - Press (20 stations) - Coiler: FOD 80/750 MA - Straightening machine: RMP 40/9/80 - Feeder: AE/Z40 Technical Data: - Step spacing 225 mm - Max. pressing force per station 60 tons - Stroke rate 20-60/min - Pulling height 105 mm - Ram stroke 220-350 mm (adjustment in 1 mm increments) - XYZ axes of the transfer are adjustable |
