Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
OKUMA MULTUS U 4000-2SW 2000
Kategorije
Obdelovalni center za struženje in rezkanje
Objekt
50716
Proizvajalec
OKUMA
Model
MULTUS U 4000-2SW 2000
Leto
2015
Upravljanje
OKUMA OSP P300S
Objekt
50716
| basic functions | ||
|---|---|---|
| number of spindles: | 2 | |
| number of turrets: | 1 | |
| live positions: yes | ||
| number of c-axes: | 2 | |
| number of y-axes: | 1 | |
| number of b-axes: | 1 | |
| Working Range Turning | ||
|---|---|---|
| swing diameter (max): | 650 | mm |
| turning diameter (max): | 650 | mm |
| bar diameter (max): | 112 | mm |
| worpiece length max.: | 2100 | mm |
| main spindle | ||
|---|---|---|
| spindle revolutions (min): | 30 | /min |
| spindle revolutions (max): | 3000 | /min |
| vretena navor: | 700 | Nm |
| spindle diameter: | 112 | mm |
| glavna pozicioniranja vretena: | 0.001 | ° |
| c-axis: yes | ||
| counter spindle | ||
|---|---|---|
| spindle revolutions (max): | 3800 | /min |
| glavna pozicioniranja vretena: | 0.001 | ° |
| c-axis: yes | ||
| X/Z slide | ||
|---|---|---|
| Z-axis travel: | 2100 | mm |
| X-axis travel: | 695 | mm |
| Y-axis travel: | 300 | mm |
| rotating range B-axis up to: | 240 | ° |
| traverse velocity Z (max): | 1000 | mm/min |
| traverse velocity X (max): | 1000 | mm/min |
| traverse velocity Y (max): | 1000 | mm/min |
| tool fixture: Milling Spindle | ||
| - rotation speeds (max): | 12000 | /min |
| - drive power: | 22 | kW |
| Tool magazine | ||
|---|---|---|
| number of positions: | 40 | |
| tool length max.: | 400 | mm |
| tool weight max.: | 10 | kg |
| X/Z slide | ||
|---|---|---|
| Z-axis travel: | 1584 | mm |
| X-axis travel: | 235 | mm |
| - counter spindle: yes | ||
| Electrical specifications | ||
|---|---|---|
| mains voltage: | 400 | V |
| mains frequency: | 50 | Hz |
| Dimensions / weights | ||
|---|---|---|
| space requirements -left/right-: | 6000 | mm |
| space requirements -front/back-: | 3050 | mm |
| total height: | 3030 | mm |
| total weight approx.: | 19000 | kg |
| -Big Bore left spindle:
Spindle holder A11 (Din 55026) Chuck is a SMW KNCS-N 325-104 - Tool holder (top) Milling spindle (Capto C6) |
| -Big Bore left spindle:
Spindle holder A11 (Din 55026) Chuck is a SMW KNCS-N 325-104 - Tool holder (top) Milling spindle (Capto C6) |
