Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
MAZAK INTEGREX I-250 HS X 1500
Kategorije
Obdelovalni center za struženje in rezkanje
Objekt
51566
Proizvajalec
MAZAK
Model
INTEGREX I-250 HS X 1500
Leto
2022
Upravljanje
MAZATROL
Objekt
51566
| basic functions | ||
|---|---|---|
| number of spindles: | 2 | |
| Working Range Turning | ||
|---|---|---|
| turning diameter (max): | 670 | mm |
| bar diameter (max): | 102 | mm |
| worpiece length max.: | 1519 | mm |
| main spindle | ||
|---|---|---|
| spindle revolutions (max): | 3300 | /min |
| moĊ motorja: | 22 | kW |
| vretena navor: | 883 | Nm |
| spindle bore diameter: | 102 | mm |
| glavna pozicioniranja vretena: | 0.0001 | ° |
| c-axis: yes | ||
| counter spindle | ||
|---|---|---|
| spindle revolutions (max): | 5000 | /min |
| moĊ motorja: | 18.5 | kW |
| glavna pozicioniranja vretena: | 0.0001 | ° |
| c-axis: yes | ||
| X/Z slide | ||
|---|---|---|
| Z-axis travel: | 1585 | mm |
| X-axis travel: | 695 | mm |
| Y-axis travel: | 300 | mm |
| - rotation speeds (max): | 12000 | /min |
| - drive power: | 24 | kW |
| Tool magazine | ||
|---|---|---|
| number of positions: | 74 | |
| Electrical specifications | ||
|---|---|---|
| mains voltage: | 400 | V |
| mains frequency: | 50 | Hz |
| attachments (turning) | ||
|---|---|---|
| bar magazine: yes | ||
| chip conveyor: yes | ||
| coolant unit: yes | ||
| through spindle coolant attachment: yes | ||
| hydraulic system: yes | ||
| European CE standards: yes | ||
| Accessories Equipment: - Cooling through the spindle, 15 bar - 5-axis simultaneous machining package - Multitool function/flashtool - Synchronised thread cutting - Cylinder interpolation - Interface for bar loader - Parts catcher - 3-jaw chuck Kitagawa BB212 for main spindle - 3-jaw chuck Kitagawa B208 for counter spindle - Mayfran ConSep2000IIWS-200: Chip conveyor, drum filter, high-pressure pump 15 bar - Bar loader Top Automazione MGE100SX Mint condition with only 430 hours of pure machining. |