Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
DOOSAN PUMA 2600 ST
Kategorije
Obdelovalni center za struženje in rezkanje
Objekt
51667
Proizvajalec
DOOSAN
Model
PUMA 2600 ST
Leto
2012
Upravljanje
FANUC 31I A
Objekt
51667
| Working Range Turning | ||
|---|---|---|
| turning diameter (max): | 760 | mm |
| bar diameter (max): | 46 | mm |
| worpiece length max.: | 1540 | mm |
| main spindle | ||
|---|---|---|
| spindle revolutions (max): | 4000 | /min |
| moĊ motorja: | 22 | kW |
| c-axis: yes | ||
| counter spindle | ||
|---|---|---|
| spindle revolutions (max): | 4000 | /min |
| moĊ motorja: | 26 | kW |
| c-axis: yes | ||
| X/Z slide | ||
|---|---|---|
| Z-axis travel: | 1585 | mm |
| X-axis travel: | 630 | mm |
| Y-axis travel: | 230 | mm |
| number of tool positions (total): | 12 | |
| number of live positions: | 12 | |
| - rotation speeds (max): | 4000 | /min |
| X/Z slide | ||
|---|---|---|
| rotating range B-axis up to: | 0.001 | ° |
| traverse velocity Z (max): | 1515 | mm/min |
| traverse velocity X (max): | 220 | mm/min |
| - rotation speeds (max): | 12000 | /min |
| - drive power: | 22 | kW |
| Tool magazine | ||
|---|---|---|
| number of positions: | 40 | |
| tool diameter max.: | 90 | mm |
| - with free neighbour positions: | 130 | mm |
| tool length max.: | 400 | mm |
| Electrical specifications | ||
|---|---|---|
| mains voltage: | 400 | V |
| mains frequency: | 50 | Hz |
| Dimensions / weights | ||
|---|---|---|
| space requirements -left/right-: | 5125 | mm |
| space requirements -front/back-: | 2625 | mm |
| total height: | 3052 | mm |
| total weight approx.: | 1550 | kg |
| attachments (turning) | ||
|---|---|---|
| chip conveyor: yes | ||
| coolant unit: yes | ||
| coolant through turret: yes | ||
| through spindle coolant attachment: yes | ||
| hydraulic system: yes | ||
| European CE standards: yes | ||
| Switch-on hours :41000h Running time:19000h Milling:3400H |
| Switch-on hours :41000h Running time:19000h Milling:3400H |