Uporabljamo piškotke, da naredimo vašo izkušnjo boljšo. V skladu z novo direktivo o e-zasebnosti, vas moramo vprašati za soglasje o nastavitvi piškotkov. Podrobnosti
TRAUB TX8I-S
Kategorije
CNC stružnica z dolgim hodom
Objekt
56560
Proizvajalec
TRAUB
Model
TX8I-S
Leto
2022
Upravljanje
TRAUB TX8I-S
Objekt
56560
| basic functions | ||
|---|---|---|
| number of spindles: | 2 | |
| number of c-axes: | 2 | |
| Working Range Turning | ||
|---|---|---|
| turning diameter (max): | 20 | mm |
| bar diameter (max): | 20 | mm |
| main spindle | ||
|---|---|---|
| spindle revolutions (max): | 10000 | /min |
| c-axis: yes | ||
| counter spindle | ||
|---|---|---|
| spindle revolutions (max): | 10000 | /min |
| c-axis: yes | ||
| Electrical specifications | ||
|---|---|---|
| mains voltage: | 400 | V |
| mains frequency: | 50 | Hz |
| attachments (turning) | ||
|---|---|---|
| chip conveyor: yes | ||
| through spindle coolant attachment: yes | ||
| hydraulic system: yes | ||
| European CE standards: yes | ||
| - Interchangeable operation: Can be used as a short- or long-turning lathe Equipment: Number of axes: 12 (15) - Main spindle C - Sub-spindle D20 with X/Z/C axes - Upper tool gantry with X/Y/Z/H/B axes and 8 tool holders - Lower tool gantry with X/Y/Z/H axes and 8 tool holders - Coolant system with 20 to 80 bar pump - FMB Turbo 2-20 loading magazine |
| - Interchangeable operation: Can be used as a short- or long-turning lathe Equipment: Number of axes: 12 (15) - Main spindle C - Sub-spindle D20 with X/Z/C axes - Upper tool gantry with X/Y/Z/H/B axes and 8 tool holders - Lower tool gantry with X/Y/Z/H axes and 8 tool holders - Coolant system with 20 to 80 bar pump - FMB Turbo 2-20 loading magazine |
